Name: Anshan Iron and steel machinery development private enterprise machinery plant
Contact: Shen Taisheng
Mobile phone: 13942222400
Zip code: 114000
Site: Anshan Iron and steel plant
Office address: Xi min, Tiexi District, Anshan, Liaoning
No. 111 Sheng Lu
What are the common methods of galvanizing pot treatment?
Steel anti-corrosion treatment often uses zinc or aluminum spraying, aggravated corrosion coatings constitute a long-term anti-corrosion structure, or with supporting heavy-duty coating coating protection. Now the common method of anticorrosion of steel is to use zinc pot equipment.
Zinc pot equipment is sprayed with zinc or aluminum coatings and anti-corrosion coatings sealed, can greatly extend the service life of the coating, from the theoretical and practical application of the effect, zinc or aluminum sprayed coating is the best anti-corrosion coating bottom. The protective life of the composite coatings of metal spraying coatings and anticorrosive coatings is longer than that of the metal spraying coatings and anticorrosive coatings, and is several times longer than that of the single coating.
The zinc pot equipment melts the sprayed wire under the action of low voltage and high current, and then sprays the compressed air to the metal component of pre-casting sand and rust removal to form the arc spraying zinc and aluminum coating, and sprays the anticorrosive sealing coating on it to form a long-term anticorrosive composite coating. Metal sprayed coatings act as anodes for cathodic protection of steel components, and thicker coatings also prevent corrosion media from immersing in the substrate.