Welcome to Anshan Iron and steel machinery development private enterprise Machinery Factory official website!

News classificatio

Contact us

Name: Anshan Iron and steel machinery development private enterprise machinery plant

Contact: Shen Taisheng

Mobile phone: 13942222400

Tel: 0412-8812449

Q Q:1481198998

Zip code: 114000

E-mail:agxinguo@163.com

Website: www.agxinguo.com

Site: Anshan Iron and steel plant

Office address: Xi min, Tiexi District, Anshan, Liaoning

No. 111 Sheng Lu


How to use zinc boiler correctly?

Current position: Home page >> News >> Industry news

How to use zinc boiler correctly?

Published: 2018-05-30 Author: Click:

Galvanizing pot has become the main product of using galvanizing pot, but the method of using galvanizing pot is different from that of using galvanizing pot. So how to use galvanizing pot? Now let me introduce to you:

Zinc boiler

Galvanizing pot has become the main product of using galvanizing pot, but the method of using galvanizing pot is different from that of using galvanizing pot. So how to use galvanizing pot? The following is the question of how to use galvanized pot correctly and correctly. The following points should be achieved:


1) strictly control the temperature of zinc solution, preferably not more than 480 degrees centigrade.


2) The productivity (output) of the galvanizing pot must be in accordance with its own size and must not exceed the heat load on the heating surface (the heat load on the heating surface is determined by the productivity of the galvanizing pot and the size of the heating area).


3) zinc slag should not be accumulated on the heating surface, and the slag cleaning should be strengthened.


4) the design of the furnace should avoid heat in the place where there is zinc slag.


5) The cold zinc ingot should not be directly added to the zinc bath of the galvanizing pot to melt the zinc ingot and the zinc scraps (including the blowing):


6) avoid direct heating of zinc ingots by galvanizing pot for melting.


7) In the production process, try to do a good job of production organization, do not start or stop causing sudden cold or hot, so that the galvanizing pot wall of the iron-zinc alloy layer off and lose protection. Introduction:


This article URL: http://en.agxinguo.com/news/389.html

Keywords:

最近浏览:

Related Products:

Related news: