Welcome to Anshan Iron and steel machinery development private enterprise Machinery Factory official website!

Products

Contact us

Name: Anshan Iron and steel machinery development private enterprise machinery plant

Contact: Shen Taisheng

Mobile phone: 13942222400

Tel: 0412-8812449

Q Q:1481198998

Zip code: 114000

E-mail:agxinguo@163.com

Website: www.agxinguo.com

Site: Anshan Iron and steel plant

Office address: Xi min, Tiexi District, Anshan, Liaoning

No. 111 Sheng Lu


Introduction of galvanized production line

Current position: Home >> Products >> Galvanizing pot

Introduction of galvanized production line

  • Category: Galvanizing pot

  • Clicks:
  • Release date: 2019/06/19
  • 在线询价
  • Detailed

Electric heating zinc boiler sales manufacturer

Proper use of galvanized pot is a matter of great importance. Zinc boilers in zinc plating production line should do the following:


1) strictly control the temperature of zinc solution, preferably not more than 480 degrees centigrade.


2) The productivity (output) of the galvanizing pot must be in accordance with its own size and must not exceed the heat load on the heating surface (the heat load on the heating surface is determined by the productivity of the galvanizing pot and the size of the heating area).


3) zinc slag should not be accumulated on the heating surface, and the slag cleaning should be strengthened.


4) the design of the furnace should avoid heat in the place where there is zinc slag.


5) The cold zinc ingot should not be directly added to the zinc bath of the galvanizing pot to melt the zinc ingot and the zinc scraps (including the blowing):


6) avoid direct heating of zinc ingots by galvanizing pot for melting.


7) In the production process, try to do a good job of production organization, do not start or stop causing sudden cold or hot, so that the galvanizing pot wall of the iron-zinc alloy layer off and lose protection.



This article URL: http://en.agxinguo.com/product/578.html

Keywords:

Related Products:

Related news: