Company name: Ansteel Machinery Development Private Enterprise Machinery Factory
Anshan Shuangxing Galvanizing Co., Ltd
Contact: Shen Taisheng
Postal code: 114000
Plant site: Ansteel plant
Office address: No. 111, Ximinsheng Road, Tiexi District, Anshan, Liaoning
Ansteel Machinery Development Private Enterprise Machinery Factory, the design institute of the company has the technical force to design the hot-dip galvanizing production line and manufacture modern hot-dip galvanizing production line equipment. Acquired Anshan Shuangxing Galvanizing Co., Ltd. in April 2021. It can design: hot-dip galvanizing production line, hot-dip galvanizing machine, hot-dip galvanizing centrifuge, and make: galvanizing pot, zinc boiler (galvanizing furnace), electrogalvanizing production line, acid tank, composite solvent tank, zinc smoke collection hood, acid gas collection hood and acid gas collection mobile hood, environmental protection equipment, and provide users with hot-dip galvanizing technical advice and teach and exchange hot-dip galvanizing additives, zinc nickel alloy, zinc aluminum alloy, rare earth alloy, bismuth alloy, multi-element alloy It is a comprehensive state-owned enterprise of the formula used in the production of hot-dip galvanizing line, such as corrosion inhibitor, rust remover and passivation solution.
Zinc pot (zinc pot), zinc boiler (zinc pot) and hot galvanizing production equipment are one of the main products of our company. The corrosion-resistant steel plate specially for zinc pot developed and produced by our company (Ansteel Group) is XG08, which has been recognized in the use of 80% of the zinc plating manufacturers nationwide. The zinc pot produced by our company with XG08 corrosion-resistant materials has already passed the GB/T1901-2000-ISO9001:2000 quality system certification, realizing specialization and industrialization.
Since 1984, our factory has tested the heating of zinc pot plate, zinc boiler, bismuth alloy, multi-element alloy, corrosion inhibitor, rust remover, passivating solution and hot galvanizing machine, hot galvanizing centrifuge, zinc smoke collection, composite solvent tank and solvent tank in Angang Steel Tube Plating Plant, and improved them. On the basis of meeting the requirements of galvanizing process, the galvanizing equipment made by them has realized semi-automatic design of the galvanizing production line, At the same time, our factory has supported and built many zinc plating manufacturers in the country. This technology has achieved satisfactory results in terms of the corrosion resistance of the zinc pot and the energy saving of the zinc boiler, as well as the use of bismuth alloy, rare earth alloy corrosion inhibitors, rust removers, and passivating solutions on the surface glossiness of the workpiece and the reduction of zinc consumption.
In 2007, due to China's requirements for environmental protection, our factory began to design and manufacture the natural gas heating zinc boiler in the zinc plating production line. The waste heat of the zinc boiler was used to heat the composite solvent tank, and the equipment technology of the multi-component alloy and hot galvanizing pot, zinc smoke collection hood, acid gas collection hood and acid gas collection mobile hood was upgraded. The engineering technicians have improved and adopted the electric heating zinc boiler and the natural gas heating zinc boiler. The high-speed pulse flame heating zinc plating furnace in the natural gas heating zinc boiler has realized the full automatic control of the heating and combustion of the zinc pot, which has the advantages of no loss of heat energy, uniform heating of the zinc pot, no overheating of the surface of the zinc pot, extended the service life of the zinc pot, energy conservation and environmental protection, and is the sixth most advanced replacement product in the world.
Ansteel Machinery Development Private Enterprise Machinery Factory is subordinate to Ansteel Group Heavy Machinery Co., Ltd. Our factory pursues good quality, good reputation and good after-sales service. We are willing to cooperate with users in the design of zinc pot (zinc pot), zinc boiler (zinc furnace), hot galvanizing machine, hot galvanizing centrifuge, hot galvanizing equipment and hot galvanizing production line, and conduct technical exchanges in bismuth alloy, multi-element alloy, corrosion inhibitor, rust remover and passivation liquid, In order to further optimize the technology of zinc fume collection, composite solvent tank and the equipment of solvent tank heating, acid gas collection hood and acid gas collection mobile hood on the basis of conforming to the galvanizing process, our factory is willing to carry out extensive technical exchanges, cooperation and improvement with users, and make efforts to promote the development and progress of China's "green" galvanizing industry.
Sincerely welcome friends from all walks of life in the hot galvanizing industry to cooperate with our factory!